China manufacturer Hydrogen Gas Industrial Compressor Oxygen Nitrogen Argon Acetylene Carbon Dioxide Gas Compressor small air compressor

Product Description

 

        Reciprotating Completely Oil-Free Diaphragm/Piston Compressor
                                   ( Blue Font To View Hyperlink)
Our company specialize in making various kinds of compressors, such as:Diaphragm compressor,Piston compressor, Air compressors,Nitrogen generator,Oxygen generator ,Gas cylinder,etc. All products can be customized according to your parameters and other requirements.
Process principle
Diaphragm compressor according to the needs of the user, choose the right type of compressor to meet the needs of the user. The diaphragm of the metal diaphragm compressor completely separates the gas from the hydraulic oil system to ensure the purity of the gas and no pollution to the gas. At the same time, advanced manufacturing technology and accurate membrane cavity design technology are adopted to ensure the service life of the diaphragm compressor diaphragm. No pollution: the metal diaphragm group completely separates the process gas from the hydraulic oil and lubricating oil parts to ensure the gas purity.
Main Structure
Diaphragm compressor structure is mainly composed of motor, base, crankcase, crankshaft linkage mechanism, cylinder components, crankshaft connecting rod, piston, oil and gas pipeline, electric control system and some accessories.
Gas Media type
Our compressors can compress ammonia, propylene, nitrogen, oxygen, helium, hydrogen, hydrogen chloride, argon, hydrogen chloride, hydrogen sulfide, hydrogen bromide, ethylene, acetylene, etc.(Nitrogen diaphragm compressor,bottle filling compressor,oxygen diaphragm compressor)

GV Model Simple Description
GV diaphragm compressor is a special structure of the volumetric compressor, is the highest level of compression in the field of gas compression, this compression method Without secondary pollution, it can ensure the purity of gas is more than 5, and it has very good protection against compressed gas. It has the characteristics of large compression ratio, good sealing performance, and the compressed gas is not polluted by lubricating oil and other CHINAMFG impurities. Therefore, it is suitable for compressing high-purity, rare and precious, flammable, explosive, toxic, harmful, corrosive and high-pressure gases. The compression method is generally specified in the world for compressing high-purity gas, flammable and explosive gas, toxic gas and oxygen. Etc. (such as nitrogen diaphragm compressor, oxygen diaphragm compressor, hydrogen sulfide diaphragm compressor, argon diaphragm compressor, etc.).
Advantages
No leakage: the compressor membrane head is sealed by static “O” ring. The O “ring is made of elastic material, with long service life and no dynamic seal to ensure no leakage during gas compression.
Corrosion resistance: the compressor membrane head can be made of 316L stainless steel, the diaphragm is made of 301 stainless steel.
Small tightening torque: “O” ring seal, can reduce flange bolt tightening torque, reduce shutdown maintenance time.

GV Model Specification

Number Model Cooling water consumption(t/h) Exhaust volume
Nm3/h)
Intake pressure
(MPa)
Exhaust pressure
(MPa)
Overall dimension
LxWxH(mm)
Weight
(t)
Motor power
(KW)
The piston stroke of the following products is 70mm
1 GV-8/8-160 0.5 8 0.8 16 1310x686x980 0.65 3
2 GV-10/6-160 0.8 10 0.6~0.7 16 1200x600x1100 0.5 4
3 GV-10/8-160 0.8 10 0.8 16 1330x740x 1080 0.65 4
4 GV-10/4-160 0.8 10 0.4 16 1330x740x1000 0.65 4
5 GV-7/8-350 0.8 7 0.8 16 1300x610x920 0.8 4
6 GV-15/5-160 0.8 15 0.5 16 1330x740x920 0.7 5.5
7 GV-5/7-350 1 5 0.7 35 1400x845x1100 0.8 5.5
The piston stroke of the following products is 95mm
8 GV-5/200 0.4 5 Normal pressure 20 1500x780x1080 0.75 3
9 GV-5/1-200 0.3 5 0.1 20 1520 x 800 x 1050 0.75 3
10 GV-11/1-25 0.6 11 0.1 2.5 1500x780x1080 0.85 4
11 GV-12/2-150 1 12 0.2 15 1600x776x1080 0.75 5.5
12 GV-20/W-160 0.8 20 1 16 1500x800x 1200 0.8 5.5
13 GV-30/5-30 0.8 30 0.5 1 1588x 768 x 1185 0.98 5.5
14 GV-10/1-40 0.4 10 0.1 4 1475 x 580×1000 1 5.5
15 GV-20/4 0.6 20 Normal pressure 0.4 1500x900x1100 1 5.5
16 GV-70/5-10 1-5 70 0.5 1 1595 x 795 x 1220 1 5.5
17 GV-8/5-210 0.4 8 0.5 21 1600 x 880×1160 1.02 5.5
18 GV-20/1-25 0.4 20 0.1 2.5 1450 x 840×1120 1.05 5.5
19 GV-20/10 – 350 1.2 20 1 35 1500x750x1140 0.8 7.5
20 GV-15/5-350 1-05 15 0.5 35 1600 x 835x 1200 1 7.5
21 GV-20/8-250 1.2 20 0.8 25 1520x825x1126 1 7.5
22 GV-12/5-320 1.2 12 0.5 32 1600 x 835x 1130 1 7.5
23 GV-15/8-350 1.1 15 0.8 35 1520x820x1160 1.02 7.5
24 GV-18/10-350 1.2 18 1 35 1255 x 800 x 1480 1.2 7.5
25 GV-35/4-25 0.3 35 0.4 2.5 1500x810x1100 1 7.5
26 GV-50/6.5-36 2.25 50 0.65 3.6 1450x850x1120 1.048 7.5
27 GV-20/5-200 1-2 20 0.5 20 1500x780x1080 0.8 7.5
The piston stroke of the following products is 130mm
28 GV-20/3-200 1.2 20 0.3 20 2030 x 1125 x 1430 1.8 15
29 GV-25/5 -160 1.2 25 0.5 16 1930 x 1150 x 1450 1.8 15
30 GV-40/0.5-10 1.2 40 0.05 1.00 2035 x 1070 x 1730 1.8 15
31 GV-20/200 1.2 20 Normal pressure 20 1850 x 1160 x 1400 1.85 15
32 GV-90/30-200 1.2 90 3 20 2030 x 970 x 1700 1-8 22
33 GV-30/8-350 2.4 30 0.8 35 2030 x 1125 x 1430 1.8 22
34 GV-30/8-350 2.4 30 0.8 35 2040 x 1125 x 1430 1.8 22
35 GV-60/10-160 3 60 1 16 1800 x 1100 x 1400 1.8 22
36 GV-60/5-160 3 60 0.5 16 2030 x 1125 x 1430 1.8 22
37 GV-40/10-400 2 40 1 40 2000 x 1150 x 1500 1.8 22
38 GV-60/10-350 2.4 60 1 35 2070 x 1125 x 1430 1.8 22
39 GV-30/5-350 2 30 0.5 35 1900 x 1130 x 1450 2 22
40 GV-40/2.5-160 2 40 0.25 16 1900 x 1130 x 1450 2 22
41 GV-150/3.5-30 2 150 0.35 3 1900 x 1130 x 1450 2 22
42 GV-70/2.5-80 2 70 0.25 8 1880 x 1060 x 1400 2.12 22
43 GV-80/2.5-80 2 80 0.25 8 1880 x 1060 x 1400 2.12 22
44 GV-120/3.5-12 3.6 120 0.35 1.2 2030 x 1045 x 1700 2.2 22
45 GV-100/7-25 1.2 100 0.7 2.5 2030 x 1045 x 1700 1.9 30
46 GV-50/5-210 2 50 0.5 21 1900 x 1130 x 1450 2 30
47 GV-80/5-200 2 80 0.5 20 1900 x 1130 x 1450 2 22
48 GV-40/5-350 2 40 0.5 35 1900 x 1130 x 1450 2 30

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Principle: Reciprocating Compressor
Application: High Back Pressure Type
Performance: Low Noise, Explosion-Proof
Mute: Mute
Lubrication Style: Oil-less
Drive Mode: Electric
Customization:
Available

|

air compressor

How Do You Troubleshoot Common Issues with Gas Air Compressors?

Troubleshooting common issues with gas air compressors involves identifying and addressing potential problems that may arise during operation. Here’s a detailed explanation of the troubleshooting process:

1. Start with Safety Precautions:

Prior to troubleshooting, ensure that the gas air compressor is turned off and disconnected from the power source. Follow proper safety procedures, such as wearing appropriate personal protective equipment (PPE), to avoid accidents or injuries.

2. Check Power Supply and Connections:

Verify that the compressor is receiving power and that all electrical connections are secure. Inspect the power cord, plug, and any switches or controls to ensure they are functioning properly. If the compressor is equipped with a battery, check its charge level and connections.

3. Check Fuel Supply:

For gas air compressors that use gasoline or propane, ensure that there is an adequate fuel supply. Check the fuel tank level and verify that the fuel shut-off valve is open. If the compressor has been sitting idle for an extended period, old or stale fuel may cause starting issues. Consider draining and replacing the fuel if necessary.

4. Inspect Air Filters:

Dirty or clogged air filters can restrict airflow and affect the compressor’s performance. Check the intake air filters and clean or replace them as needed. Clogged filters can be cleaned with compressed air or washed with mild detergent and water, depending on the type of filter.

5. Check Oil Level and Quality:

If the gas air compressor has an engine with an oil reservoir, verify the oil level using the dipstick or oil level indicator. Insufficient oil can lead to engine damage or poor performance. Additionally, check the oil quality to ensure it is clean and within the recommended viscosity range. If needed, change the oil following the manufacturer’s guidelines.

6. Inspect Spark Plug:

If the gas air compressor uses a spark plug ignition system, inspect the spark plug for signs of damage or fouling. Clean or replace the spark plug if necessary, following the manufacturer’s recommendations for gap setting and torque.

7. Check Belts and Pulleys:

Inspect the belts and pulleys that drive the compressor pump. Loose or worn belts can cause slippage and affect the compressor’s performance. Tighten or replace any damaged belts, and ensure that the pulleys are properly aligned.

8. Listen for Unusual Noises:

During operation, listen for any unusual or excessive noises, such as grinding, rattling, or squealing sounds. Unusual noises could indicate mechanical issues, loose components, or improper lubrication. If identified, consult the compressor’s manual or contact a qualified technician for further inspection and repair.

9. Consult the Owner’s Manual:

If troubleshooting steps do not resolve the issue, refer to the compressor’s owner’s manual for specific troubleshooting guidance. The manual may provide additional troubleshooting steps, diagnostic charts, or recommended maintenance procedures.

10. Seek Professional Assistance:

If the issue persists or if you are unsure about performing further troubleshooting steps, it is recommended to seek assistance from a qualified technician or contact the manufacturer’s customer support for guidance.

Remember to always prioritize safety and follow proper maintenance practices to prevent issues and ensure the reliable performance of the gas air compressor.

air compressor

Can Gas Air Compressors Be Used for Pneumatic Tools?

Yes, gas air compressors can be used for pneumatic tools. Here’s a detailed explanation:

1. Versatile Power Source:

Gas air compressors, powered by gasoline or diesel engines, provide a portable and versatile power source for operating pneumatic tools. They eliminate the need for electrical power supply, making them suitable for remote locations or construction sites where electricity may not be readily available.

2. High Power Output:

Gas air compressors typically offer higher power output compared to electric compressors of similar size. This high power output enables gas compressors to deliver the necessary air pressure and volume required by pneumatic tools, ensuring optimal tool performance.

3. Mobility and Portability:

Gas air compressors are often designed with mobility and portability in mind. They are compact and equipped with wheels or handles, allowing for easy transportation to different job sites. This mobility is advantageous when using pneumatic tools in various locations or when working in confined spaces.

4. Continuous Operation:

Gas air compressors can provide continuous air supply for pneumatic tools without the need for frequent pauses or recharging. As long as there is an adequate fuel supply, gas compressors can operate for extended periods, allowing uninterrupted use of pneumatic tools for tasks such as drilling, nailing, sanding, or painting.

5. Suitable for High-Demand Applications:

Pneumatic tools used in heavy-duty applications often require a robust air supply to meet their performance requirements. Gas air compressors can generate higher air flow rates and maintain higher operating pressures, making them suitable for high-demand pneumatic tools like jackhammers, impact wrenches, or sandblasters.

6. Flexibility in Compressor Size:

Gas air compressors are available in various sizes and capacities, allowing users to choose the compressor that best matches the air demands of their pneumatic tools. From small portable compressors for light-duty tasks to larger industrial-grade compressors for heavy-duty applications, there is a wide range of options to suit different tool requirements.

7. Reduced Dependency on Electrical Infrastructure:

Using gas air compressors for pneumatic tools reduces reliance on electrical infrastructure. In situations where the electrical power supply is limited, unreliable, or expensive, gas compressors offer a viable alternative, ensuring consistent tool performance without concerns about power availability.

It’s important to note that gas air compressors emit exhaust gases during operation, so proper ventilation is necessary when using them in enclosed spaces to ensure the safety of workers.

In summary, gas air compressors can effectively power pneumatic tools, offering mobility, high power output, continuous operation, and suitability for various applications. They provide a reliable and portable solution for utilizing pneumatic tools in locations where electrical power supply may be limited or unavailable.

air compressor

What Safety Precautions Should Be Taken When Operating Gas Air Compressors?

Operating gas air compressors safely is essential to prevent accidents, injuries, and equipment damage. It’s important to follow proper safety precautions to ensure a safe working environment. Here’s a detailed explanation of the safety precautions that should be taken when operating gas air compressors:

1. Read and Follow the Manufacturer’s Instructions:

Before operating a gas air compressor, carefully read and understand the manufacturer’s instructions, user manual, and safety guidelines. Follow the recommended procedures, maintenance schedules, and any specific instructions provided by the manufacturer.

2. Provide Adequate Ventilation:

Gas air compressors generate exhaust fumes and heat during operation. Ensure that the operating area is well-ventilated to prevent the accumulation of exhaust gases, which can be harmful or even fatal in high concentrations. If operating indoors, use ventilation systems or open windows and doors to allow fresh air circulation.

3. Wear Personal Protective Equipment (PPE):

Wear appropriate personal protective equipment (PPE) when operating a gas air compressor. This may include safety glasses, hearing protection, gloves, and sturdy footwear. PPE helps protect against potential hazards such as flying debris, noise exposure, and hand injuries.

4. Perform Regular Maintenance:

Maintain the gas air compressor according to the manufacturer’s recommendations. Regularly inspect the compressor for any signs of wear, damage, or leaks. Keep the compressor clean and free from debris. Replace worn-out parts and components as needed to ensure safe and efficient operation.

5. Preventive Measures for Fuel Handling:

If the gas air compressor is powered by fuels such as gasoline, diesel, or propane, take appropriate precautions for fuel handling:

  • Store fuel in approved containers and in well-ventilated areas away from ignition sources.
  • Refuel the compressor in a well-ventilated outdoor area, following proper refueling procedures and avoiding spills.
  • Handle fuel with caution, ensuring that there are no fuel leaks or spills near the compressor.
  • Never smoke or use open flames near the compressor or fuel storage areas.

6. Use Proper Electrical Connections:

If the gas air compressor requires electrical power, follow these electrical safety precautions:

  • Ensure that the electrical connections and wiring are properly grounded and in compliance with local electrical codes.
  • Avoid using extension cords unless recommended by the manufacturer.
  • Inspect electrical cords and plugs for damage before use.
  • Do not overload electrical circuits or use improper voltage sources.

7. Secure the Compressor:

Ensure that the gas air compressor is securely positioned and stable during operation. Use appropriate mounting or anchoring methods, especially for portable compressors. This helps prevent tipping, vibrations, and movement that could lead to accidents or injuries.

8. Familiarize Yourself with Emergency Procedures:

Be familiar with emergency procedures and know how to shut off the compressor quickly in case of an emergency or malfunction. Have fire extinguishers readily available and know how to use them effectively. Develop an emergency action plan and communicate it to all personnel working with or around the compressor.

It’s crucial to prioritize safety when operating gas air compressors. By following these safety precautions and using common sense, you can minimize the risks associated with compressor operation and create a safer work environment for yourself and others.

China manufacturer Hydrogen Gas Industrial Compressor Oxygen Nitrogen Argon Acetylene Carbon Dioxide Gas Compressor   small air compressor China manufacturer Hydrogen Gas Industrial Compressor Oxygen Nitrogen Argon Acetylene Carbon Dioxide Gas Compressor   small air compressor
editor by CX 2024-04-09